Plasma Cutter Troubleshooting
If you cannot find what you are looking for here, reach out to us at support@langmuirsystems.com
- Plasma Cutter is not automatically firing or is mis-firing intermittently
- Excessive cut edge angularity (bevel)
- Excessive backside dross (slag)
- Excessive topside dross (spatter)
- Cut holes are excessively tapered
- Workpiece experiences a large amount of distortion when cutting
- Cut does not penetrate completely through workpiece
- Consumables are wearing out more quickly than expected
- Unequal (uni-directional) edge angularity
- Irregular cut geometry along one axis
- Part dimensions are oversized/undersized compared to design
- Divots created in cut edge at starts/stops